MX5-NC (4pt MAXI)

£350.00

Main Hoop & Rear Stays, plus …

Customise your cage below:

Description

MX5 (NC) MAXI 4pt roll bar: 

– This is essentially the rear HALF of the FULL cage listed HERE . The front section can even be added at a later stage. Photos in the gallery show the cage with front section attached.
– This is designed to be the LARGEST 4pt cage that will fit under the soft top OR hardtop (not PRHT) with the cabin stripped out for track use.

– Our MX5 items are manufactured to exacting Motorsport standards. For the NC model this becomes a feature that is unique to MRC. For this reason and more, MRC are widely recognised as producing the absolute finest NC rollbars available on the worldwide market.
> For comparison purposes to other brands, before purchasing customers are encouraged to note that the position of the rear stay bars must be within 6″ from the top of the main roll hoop. Also notice that the angle of separation between the hoop and the stays is a minimum of 30 degrees. Whilst main sections (Hoop & Stays) must be at least 45 x 2.5 mm, diagonals and harness bars must be no less than 38 x 2.5mm. If these dimensions are not present on your NC rollbar then the item is NOT made to international motorsport standards.

– This item will require welding to install the reinforcement plates, to which the cage bolts to.
– The Soft Top will NOT fold down with this size of rollbar.
– Supplied with all installation hardware.
– See Roll Cage DIAGRAMS in this item’s photo gallery for references.

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.